A 12V inline fuse harness directly from the vehicle battery, a properly implemented 'add a fuse' adaper and a 12V DC adapter for 12V outlets are all good power sources but are dependent on the power draw, amperage, and wattage of the product being powered

This is dependent on the location of your product and your power source. We do our best to accommodate a typical installation but it is always a good idea to pick up a spool of basic automotive bulk wire.

All products and installations will be diffrent. In most cases, our product will come with some sort of mounting hardware whether it is 3M tape or metal brackets. When mounting your product, we always recommend test fitting your product, and starting with a clean mounting surface between 65-90 degrees F (18-32 degrees C). For more detailed information on mounting and installing your product, please consult the *Installation Instructions*

This is dependent on the draw of your product, but if left on long enough without a source to charge the battery (a running engine, solar panel, trickle charger) almost anything will drain a battery.

This is dependent on the draw of your product, but if left on long enough without a source to charge the battery (a running engine, solar panel, trickle charger) almost anything will drain a battery - be cautious!

This is dependent on not only the product, but state, municipality, or township laws. Please consult your local laws to ensure the operation of a lighted accessory while driving is allowed.

This is dependent on the product. Different things such as LED size, color, amount of LEDs in an array, reflector type, lens optics, all play a role in the lumen output of an LED product. Typically our packaging will display a lumen count; if there is no listing please contact our team.

This is dependent on the product. Different things such as LED size, color, amount of LEDs in an array, all play a role in the amp draw of an LED product. Typically our packaging and or installation instructions will display an amperage figure; if there is no listing please contact our team.

This is dependent on the product. Different things such as LED size, color, amount of LEDs in an array, reflector type, lens optics, all play a role in the lumen output of an LED product. Typically our packaging will display a lumen count; if there is no listing please contact our team.

This is dependent on the product; typically there is an operation lifetime listed on the package. Figures can vary from 20,000 to 50,000 hours operation lifetime.

Our products are usually designed for exterior or interior, or both. Packaging, water resistance, and attachment method also help determine where the product should be installed!

Most of our products are waterproof to some degree. You can tell just how waterproof the product is by it's IP rating. Our product's IP rating should be listed in the product details. In general, here is what you need to know about IP ratings in regards to our products. IP = "In Protection" First Digit = Solids Protection Second Digit = Liquids Protection The higher the number, the more it protects. IP65 = Dust proof and Rain / Splash proof (Can get wet but DO NOT SUBMERGE) IP66 = Dust proof and Rain / Splash proof (Can get wet but DO NOT SUBMERGE) IP67 = Dust proof and Submersible up to 1m (3ft) IP68 = Dust proof and Submersible up to 30m (100ft)

Typically we recommend 2.5 or 5 amp inline fuses for smaller draw LED products; 10, 15 or 20 amp fuses are recommended on larger auxiliary lights. Be sure to check your installation instructions!