STEP 1

Park the vehicle in a space that is level, close to a wall, and allows you to back up 30 ft.

STEP 2

Pull up close to the wall and using a tape measure, extend a straight line from the absolute center each headlight to the wall, marking the spot with a piece of tape or chalk.

STEP 3

Create a straight line between the left and right ‘center marks’ using tape or chalk.

STEP 4

Create a straight line between the left and right ‘center marks’ using tape or chalk.

STEP 5

Using the factory adjustment points on your headlight, adjust the headlight so that:

A

The beam is centered over the initial L & R Mounting Points.

B

80% of the light output sits below the centering line.

STEP 7

Ensure connections are secure